![]() This is a screenshot of the UTM dashboard showing features enabled and disabled. Load the free license file for continued UTM functionality. Log into the UTM VM at to access the UTM’s menus.Īt first login, choose which UTM options to enable. One of many automatic Linux installation screens. The Ethernet 4 interface is added as the UTM VM’s LAN interface. The Ethernet 3 interface is the UTM VM’s WAN interface. The Ethernet 4 interface is used as the UTM’s LAN interface.ĬPU, RAM, and Disk resources are configured for the UTM VM. The Ethernet 3 interface is used as the UTM’s WAN interface. This is the TS-453 Pro’s Ethernet 2 interface previously configured for VM use. ![]() Setup a free Sophos account and download a free license. The whole process is shown in the gallery below. The UTM’s DHCP server will assign IP addresses to the NAS on Ethernet 1 and VMs on Ethernet 2. If you have a static public IP, you can configure that IP in the UTM’s web menu. Ethernet 3 = UTM WAN Interface: The UTM WAN interface will get a public IP address from your ISP via DHCP.This connection is needed only if you have other VMs running on the NAS. Ethernet 2 = VM interface: Assign each VM a static IP address in the 192.168.2.0/24 subnet or allow them to get their IP address via DHCP from the UTM.You access NAS administration here, including Virtualization Station Ethernet 1 = NAS interface: Assign the NAS a static IP address in the 192.168.2.0/24 subnet or allow it to get it an address via DHCP from the UTM.In our configuration, the UTM admin interface is located at. Since the virtual UTM is now acting as your LAN’s router, it assigns all IP addresses, including those for normal NAS functions. Since you’ll want to access both the virtual UTM and normal NAS features, you’ll need to make multiple connections between the NAS and your network as shown in the diagram below. Once the VM installation completes, log into the Sophos UTM web GUI and follow the UTM setup wizard. You then configure the VM, Start it and let it install. To set up the VM, you’ll need to access the Network Settings, Create VM and Virtual Machine You can continue to use your current router’s wireless portion by converting it to an access point. The UTM would normally replace your current router. Interfaces is the UTM’s WAN interface, the other will be the UTM’s LAN interface. Two of the NAS Ethernet ports are used for the UTM WAN and LAN connections. The TS-453 Pro was configured so the UTM VM had two CPU It’s worth noting the Intel Baytrail processor used in the TS-453 Pro and other QNAP NASes provides higher performance with lower power consumption and more memory than competitor’s products. A QNAP TS-453 Pro with a quad-core Intel Celeron 2.0 GHz CPU, 8 GB of RAM and four Intel 10/100/1000 Ethernet ports is plenty powerful for this application. Sophos’ hardware requirements for the UTM are an Intel compatible 1.5 GHz CPU, 1 GB RAM and 20 GB of hard disk space. One very useful thing this capability enables is enhancing the security of your network by adding a virtual Unified Threat Management (UTM) appliance, specifically Sophos’ free UTM Home Edition. Virtualization Station provides access to remote desktops on each VM, takes VM snapshots and even connects USB devices to VMs. QNAP’s Virtualization Station supports a wide range of Windows, Linux and UNIX-based VMs, including pre-configured virtual appliances from Bitnami and VMware. So big in fact, that it is the only NAS vendor to make it easy to run multiple Virtual Machines (VMs) on a single NAS and centrally manage them via a user-friendly interface.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |